37
Communicator
|
3.05
9 COMMUNICATOR FUNCTIONS
The following sections detail functions which relate to the Communicator hardware and software.
•
Saving and Restoring System Settings, page 37
•
Viewing Relay Settings, page 38
•
9.1 Saving and Restoring System Settings
•
Go to
SYSTEM > Save/Res Setting > Restore.
o
RESTORE:
Use this feature to restore all settings that were previously saved
(restore
point is the date of the last save performed)
.
•
Go to
SYSTEM > Save/Res Setting > Save.
o
SAVE:
Use this feature to save all settings (
once a SAVE is performed, this is the new
RESTORE point
).
9.2 Test Functions
The following section details how to test Communicator functions.
•
•
Viewing Device Status, page 38
•
Viewing the Software and Hardware Version, page 38
9.2.1 Testing the Backup
Battery
This section details the Backup Battery test.
•
Select
SYSTEM > Test > Battery
.
To test the battery:
1. Unplug the unit.
2. View the battery test.
CAUTION In addtion to this test, refer to Testing the Alarm Backup Batteries, page 43.
MEMORY RESTORE POINT
21-FEB-10
CONTINUE?
NO
YES
CREATE A NEW MEMORY
RESTORE POINT
NO
YES
BATTERY TEST
-
+ 100%
Charger active
