Rotel RSDX-02, Техническое руководство

Страница: 23 / 43

Procedure of RSDX-02 firmware upgrade
1. NOTE: Confirm the current Firmware version in the TEST mode. See TEST
MODE method below. Power off the unit.
2. Connect the TV to monitor in the normal power on condition with DVD input,
insert the Firmware CD-R disc. It is appeared “Firmware Upgrade Disc ...
press UP” on the TV. Press UP button of remote unit.
3. It is play and automatically open the tray after upgraded the Firmware. Take
out the disc and power off.
4. Check the updated Firmware version in the TEST mode. Finish.
5. Finally, set the Initialize the RSDX-02 DVD section.
CAUTION: Do not power off during updating until the unit is open the tray.
How to go TEST MODE:
1. To set the TEST MODE on the RSDX-02, Press and hold both
“ DVD ” and
“ STOP ” keys then connect the power line to RSDX-02 until appear “ TEST xx ”
in the FL display. “ xx ” is Area code.
2. The TEST mode can be changed by “ CHOICE ” of remote key to show the
“ Firm version ” in the FL display “ XX XX XX ” and last two digits show
Firmware number.
The methods of initialize the RSDX-02 DVD section:
1. To set the TEST MODE on the RSDX-02, Press and hold both
“
DVD
”
and
“
STOP
”
keys then connect the power line to RSDX-02
until appear
“
TEST xx
”
in the FL display.
“
xx
”
is Area code.
2. Press
“
PAUSE
”
button to initialize the DVD. When an indication of
“
INPUTATT
”
is displayed. Finish.
3. Press Standby switch to save.
4. The TEST mode can be changed by
“
CHOICE
”
of remote key to
show the
“
Firm version
”
,
“
All FL segments
”
,
“
Check
”
of mechanism,
“
Expert
”
of Front-end.
23