Rotel RB-1090 Скачать руководство пользователя страница 5

5

WARNING: There are no user serviceable parts in-
side. Refer all servicing to qualified service person-
nel.

WARNING: To reduce the risk of fire or electric shock,
do not expose the unit to moisture or water. Do not
allow foreign objects to get into the enclosure. If the
unit is exposed to moisture, or a foreign object gets
into the enclosure, immediately disconnect the power
cord from the wall. Take the unit to a qualified ser-
vice person for inspection and necessary repairs.

Read all the instructions before connecting or operating the
component. Keep this manual so you can refer to these safety
instructions.

Heed all warnings and safety information in these instruc-
tions and on the product itself. Follow all operating instruc-
tions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clearance
around the unit. Do not place the unit on a bed, sofa, rug, or
similar surface that could block the ventilation slots. If the
component is placed in a bookcase or cabinet, there must be
ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves,
or any other appliance that produces heat.

The unit must be connected to a power supply only of the type
and voltage specified on the rear panel of the unit.

Connect the component to the power outlet only with the sup-
plied power supply cable or an exact equivalent. Do not modify
the supplied cable in any way. Do not attempt to defeat ground-
ing and/or polarization provisions. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched,
bent at severe angles, exposed to heat, or damaged in any
way. Pay particular attention to the power cord at the plug
and where it exits the back of the unit.

The power cord should be unplugged from the wall outlet if
the unit is to be left unused for a long period of time.

Immediately stop using the component and have it inspected
and/or serviced by a qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough to sup-
port its weight. Do not place it on a moveable cart that could
tip over.

RB-1090

English

Owner’s Manual

5

Manuel d’utilisation

10

Bedienungsanleitung

15

Manuale di istruzioni

20

Manual de instrucciones 25
Gebruiksaanwijzing

31

Содержание RB-1090











Отзывы: