Rotech TRISTAR J18 AT, Инструкция по эксплуатации

Страница: 7 / 11

7
Interface Name Pin definition
IO3 The reversed panel
status indicator
+12V —+12V output, power for indicator
GND — Power GND
GND —Power GND
FRL — Reversed red indicator
FBL —Reversed blue indicator
FYL —Reversed yellow indicator
+12V - +12V output, powering the panel status
indicator
GND
GND
FRL - status indicator red light
FBL - status indicator blue light
FYL - status indicator yellow light
I04 Forward panel status
indicator
+12V —+12V output, power for indicator
GND —Power GND
GND —Power GND
ZRL —Forwarded red indicator
ZBL —Forwarded blue indicator
ZYL —Forwarded yellow indicator
+12V - +12V output, powering the panel status
indicator
GND
GND
ZRL - status indicator red light
ZBL - status indicator blue light
ZYL - status indicator yellow light
IO5 Alarm interface ALM —Alarm output signal
ALM —Alarm output signal ALM
GND
IO7 Forward, reversed
counting
Arm drop signal input
B1 —Reserved
B2 —Reserved
EX2 —Reserved
EX1 —Reserved
FCNT —Reverse pass counting
ZCNT —Forward pass counting
LOCK —Arm drop signal input(fire arm drop)
IO9 Communication
interface
485 A
485 B
8.4 Digital zero setting method

Power on, waiting for the self-test to be completed.

Press the “Set/Confirm/Save” button for 3 seconds to enter the set up interface,
then use the up and down keys to adjust the parameter type to “P-25”, and
finally press the “Set/Confirm/Save” button within 5 seconds.

Adjust any one of the arms manually to the "closed position", the gate is
automatically reset, the turnstile will use the newly set zero point after the reset.
9. Trouble shooting
Problem Action