16
8.5 The Control Panel
In order to run the machine follow the instructions below:
1.
Press the green start button on the machine to start the conveyor.
2.
Once the conveyor is clear of all product, press the red stop button to stop the conveyor.
Please note:
•
Do not stop the conveyor until all of the product has been collected in the catcher.
Setting the speed:
Adjust the speed of the machine by selecting either low or high speed using the speed
selector switch
Please note:
•
When ‘Low’ speed is selected the conveyor runs at approx. 20M/min
•
When ‘High’ speed is selected the conveyor runs at approx. 60M/min
8. Operation
1 - Speed Selector Switch
2 - Stop Button
3 - Start Button
4 - IEC Connector
5 - Power On/ Off Switch
6 - Reset Button
1
2
3
4
5
6
