
Remote Control Pairing
RIGHT
LEFT
ANTI
SNORE
RIGHT
LEFT
RIGHT
LEFT
POWER
LED
APP
Right Side
Massage
Left Side
Massage
USB
Left Head
Motor
Right Head
Motor
Foot
Motor
Backlight Wireless Remote Control Guide
Left Head Lifting
Simultaneous Lifting of
Independant Heads
Foot Lifting
Right Head Lifting
Foot Lowering
Zero Gravity
Left Side Massage
Right Side Massage
Memory
Flat
Under-bed Lighting
Anti-snore
Left Head Lowering
Simultaneous Lowering of
Independant Heads
Right Head Lowering
RIGHT
LEFT
ANTI
SNORE
RIGHT
LEFT
RIGHT
LEFT
06
07
Press to memorize the desired position.
LEFT HEAD UP/DOWN BUTTONS
Press and hold to lift or lower the
LEFT HEAD section.
RIGHT HEAD UP/DOWN BUTTONS
Press and hold to lift or lower the HEAD
section.
One Touch Buttons
Press to adjust the base to the flat position.
Press to turn on the under-bed lighting. The light will turn off if the button is not pressed within 10 min.
Adjustment
STEP 1: Operate the remote control to get your desired position.
STEP 2: Press and hold "M" for more than 3 s until you hear a beep of the buzzer on the control box;
the backlight of the remote control flashes twice, which means the memory position is saved.
Press to turn on the massage.
Press the button once to increase one intensity level. There are 3 intensity levels available. When it
has been in the 3rd level, press the button again and the massage will turn off. The massage motor
will turn off automatically after 30 min.
LEFT
LEFT
RIGHT
RIGHT
RIGHT
LEFT
Press to adjust the base to the pre-programmed anti-snore position that let you get a restful night.
DUAL HEAD UP/DOWN BUTTONS
Press and hold to lift or lower simultaneously
the independent heads.
FOOT UP/DOWN BUTTONS
Press and hold to lift or lower the FOOT section.
1. Unplug the adjustable base from the power source, wait 60s, then power it on.
2. Press and hold at the same time.
3. You will hear a beep sound of the buzzer and the backlit light of the wireless remote flashes two times,
which means the pairing is successful.
NOTE: Please complete the repairing within 30s after the foundation is powered on.
Press to elevate the foot section slightly higher than the chest, in effect, allowing the blood to flow
back to the heart to help reduce stress and fatigue.
The original remote that comes in the box is already paired to the adjustable base. Just wait 30s after the
adjustable base is powered on, then the remote can be used normally. In the event that the remote is not
paired with the adjustable base, follow the steps below.