Remote Control Pairing
Head
Motor
Foot
Motor
Neck
Motor
Lumbar
Motor
Power
USB
Foot
Massage
Head
Massage
LED
APP
Sync
Synchronizing Twin XL Bases
If simultaneous operation of two twin XL bases is desired, use the synchronisation cord to connect the
electronics of both bases together.
Remote control
Sync Cord
Head
Motor
Foot
Motor
Neck
Motor
Lumbar
Motor
Power
USB
Foot
Massage
Head
Massage
LED
APP
Sync
Head
Motor
Foot
Motor
Neck
Motor
Lumbar
Motor
Power
USB
Foot
Massage
Head
Massage
LED
APP
Sync
Quadruplex Cable
Triplex Cable
Attention:
(1) If you want to toggle from "A" or "B" to "Central" position to realize sync control, please press
and hold "Flat" again until you reach a flat position. (2) The quadruplex cable is in master control
when synchronizing and the Bluetooth must be plugged in the master control box. (3) The interval
must be more than 4 s between plug in and plug out the sync cord.
STEP 1: Unplug bases from the power source.
STEP 2: Connect the male ends of the sync cord to the female sync plugs of the control boxes (Refer to illustration
above).
STEP 3: Plug bases back into the power source.
STEP 4: Press and hold and buttons; a beep of the buzzer will be heard, and the backlight of the remote
control will flash twice. Open the battery box and toggle the switch to “Central” position first, next press
and hold “FLAT” until you hear a beep from each buzzer on the control box, which means the two bases
can be synchronized with one remote control.
NOTE: To control the two bases separately without removing the sync cord, open the control remote battery box
and flip the switch to the “A” or “B” position.
Backlight Wireless Remote Control Guide
Head Lifting
Head Lowering
Zero Gravity
Back Massage
Deactivate Massage
Foot Massage
Memory 2
Memory 1
Foot Lifting
Foot Lowering
Flat
Under-bed Lighting
Anti-snore
HEAD UP/DOWN BUTTONS
Press and hold to lift or lower the HEAD section.
One Touch Buttons
Press to elevate the foot section slightly higher than the chest, in effect, allowing the blood to flow
back to the heart to help reduce stress and fatigue.
FOOT UP/DOWN BUTTONS
Press and hold to lift or lower the FOOT section.
Press to adjust the base to the flat position.
Press to turn on the under-bed lighting. The light will turn off if the button is not pressed within 10
min.
Press to adjust the base to the pre-programmed anti-snore position that let you get a restful night.
Press to turn on the Back/Foot Massage.
Press to turn off the massage.
Adjustment
Press the button once to increase one intensity level, there are 3 intensity levels available. When
it is in the 3rd level, press the button again and the massage will turn off. The massage motor will
turn off automatically after 30 min.
Press to adjust the base to "Memory 1" or "Memory 2".
STEP 1: Operate the remote to your desired position.
STEP 2: Press and hold "M1" or "M2" for more than 3s till hearing a beep sound of the buzzer on
the control box and the backlit light of the wireless remote flashes two times, which means
the memory position is saved.
06
07
The original remote that comes in the box is already paired to the adjustable base. Just wait 30s after the
adjustable base is powered on, then the remote can be used normally. In the event that the remote is not
paired with the adjustable base, follow the steps below.
1. Unplug the adjustable base from the power source, wait 60s, then power it on.
2. Press and hold at the same time.
3. You will hear a beep sound of the buzzer and the backlit light of the wireless remote flashes two times,
which means the pairing is successful.
NOTE: Please complete the repairing within 30s after the foundation is powered on.
