Rotax 125 MAX DD2 evo, Инструкция по установке и руководство оператора

Страница: 6 / 120

BRP-Rotax
INSTALLATION MANUAL
Chapter: INTRO
Preface
For information regarding repair of the engine 125 MAX DD2 evo contact an authorized
service center or consult the workshop manual
(available on internet under
www.rotax-kart.com ).
We ask to hand over this manual, the engine identity card and the product and
service registration document to the new owner in case of a change of ownership.
Contents
This Installation Manual contains instructions for all the installation work on the ROTAX®-
Engine Type 125 MAX DD2 evo.
General
This document and all technical data and procedures therein are property of
BRP-Rotax GmbH & Co KG and based on the state of knowledge at the time of
publication The Manual has been drawn up to the best of our knowledge. However,
excluding any liability.
We reserve all rights including technical modification and possibility of errors. Reprinting,
translation or copies in whole or in part, are authorized only after written permission by
BRP-Rotax GmbH & Co KG.
BRP-Rotax GmbH & Co KG reserves the right at any time to discontinue or change
specifications, prices, designs, features, models or equipment without incurring obligation.
Engine performance may vary depending on, among other things, general conditions,
ambient temperature and altitude.
NOTE
The registration document and engine identity card must be provided to the final
consumer upon delivery by the authorized service center with handover date and
company stamp.
NOTE
The data entered in the registration document and/or engine identity card is
required for the verification of a warranty claim. Without a completely filled-in
engine identity card, no warranty claim will be granted.
NOTE
In case of participating in the ROTAX® MAX CHALLENGE (RMC) the engine
must be verified for conformity with the technical regulations and sealed. The
serial number of the seal must be entered in the engine identity card.
Effectivity: 125 MAX DD2 evo INTRO
Page 1
Edition: September 01 2019