3. Fit the grease holder ring (Fig.
_
9 ref.
_
1) with the 2 supplied bolts
(Fig.
_
9 ref.
_
2), to the threaded inserts provided on the machine
(Fig.
_
9 ref.
_
3), as shown in Fig.
_
9.
Fig. 9
4. Mount the side tray (Fig.
_
10 ref.
_
1) to the machine frame using
the supplied bolts (Fig.
_
10 ref.
_
2), as shown in Fig.
_
10.
Fig. 10
1
2
2
5. Remove the handle control unit (Fig.
_
11 ref.
_
1), complete with
support (Fig.
_
11 ref.
_
2), from the bracket (Fig.
_
11 ref.
_
3). Remove
the bracket (Fig.
_
11 ref.
_
3) from the machine frame and remove
it upwards. Reassemble the manipulator unit (Fig.
_
11 ref.
_
1) on
the machine frame by manually accompanying the set of cables/
pipes (Fig.
_
11 ref.
_
6) inside the prepared opening, as indicated
in Fig.
_
11.
PLACE THE SET OF CABLES/PIPES (Fig. 11
ref. 6) INSIDE THE MACHINE BRINGING THE
EXCESS LENGTH DOWNWARDS.
9.2
Assembly procedures
1. Fit the tank (Fig.
_
7 ref.
_
1) of the Tubeless inflation unit by tighten-
ing the supplied bolts (Fig.
_
7 ref.
_
2) to the threaded inserts on
the machine (Fig.
_
7 ref.
_
3), as shown in Fig.
_
7.
Fig. 7
2. Connect the black pipe (Fig.
_
8 ref.
_
1) and the blue pipe (Fig.
_
8
ref.
_
2) on the provided quick couplings as shown in figure Fig.
_
8.
Fig. 8
14
