Loop the safety lanyard over the tower next to the
speaker clamp.
B
C
D
E
F
G
Apply RED Loctite to 3 bolts and fasten speaker
through tower speaker plate using a 5/16” allen key.
With your stereo/amp switched off, insert the Deutsch
wiring harness into speaker.
x6
TOWER
5/16”
Torque bolts
to 20 ft/lb
THREADLOCKER
Feed one end of the lanyard through the other end.
Insert the screw through the washer and lanyard loop.
Using a Phillips head screwdriver, securely attach the
lanyard to the small hole on the speaker between the
base of the clamp and the Deutsch connector.. Do not
over tighten.
TOWER
TOWER
x2
Pg. 2/2
Rev. 28-May-15
Vamp Spin Speaker
Installation Instructions
If you have any questions please call : 1-321-638-1331
www.roswellmarine.com
