MC Aquatone 6.5 HLCD
Installation Instructions
Rev. 21-Oct-13
Pg. 2/3
Hang the speaker assembly on the front edge of the speaker can using the hook on the rear of the speaker assembly.
E
Remove the universal clamp by unbolting the 4 X 3/8” bolts
inside of the housing. Keep these bolts, you will need them
for the next step.
5/16"
Using wire cutters, sever the wires from the Deutsch
connector inside the speaker can.
F
Assemble the lower adaptor to the speaker housing using the
3/8” bolts from step F. Apply RED Loctite to these bolts.
G
Feed the wires from the tower through the middle of the
lower adaptor and fasten to tower using 4 X 1/4” bolts.
x4
Torque bolt
to 30 ft-lb
I
H
3/16"
R
E
K
C
OL
D
A
E
R
HT
Torque bolt
to 30 ft-lb
5/16"
R
E
K
C
OL
D
A
E
R
HT
