Adapter Hardware
MC Aquatone 6.5 HLCD
Installation Instructions
A
B
Tools Required
3/16" Allen Key
7/32" Allen Key
HEAT GUN
1/4-20 UNC x 0.75”
Pull the speaker wires out of the tower and insert them
through the hole in the adapter plate.
Choose the two mounting nubs on the tower you want to
use and remove the caps.
Rev. 21-Oct-13
Pg. 1/3
x8
Pull wires through
x2
Adapter plate
Adapter plate
Mount the adapter plate to the first nub using 4 bolts. Use
RED Loctite. Torque bolts to 15 ft-lb.
C
D
Remove the rear flathead bolt on the back of the speaker
housing and pull the speaker assembly with spine out of
the housing to access bolts beneath the clamp.
3/16"
R
E
K
C
OL
D
A
E
R
HT
3/16"
7/32"
Torque bolt
to 15 ft-lb
x2
x4
THREADLOCKER
WIRE
CRIMP
WIRE
STRIPPERS
ADAPTOR PLATE
LOWER ADAPTOR
