3
Parking Sensor System
●
PRODUCT COMPOSITION
The system consists of 3 basic components (see Fig.1):
Electronic Control Unit (ECU)
Detection Units - Ultrasonic Sensors
Warning Unit
When the vehicle is placed in reverse, the warning unit
warns drivers of obstacles by sounding an alarm.
Note: The warning unit has a High/Low switch for volume
control.
●
HOW TO USE
System Startup
Reverse Parking System
The system is fully automatic. It is active only when the
vehicle is placed in reverse.
At system power-up (Vehicle ignition on, in reverse), you
will hear a short, half-second ‘beep’.
Diagnostics
After the system is turned on, the Park-Pro HD will go into
a self diagnostic mode for three seconds.
If, after three seconds a sensor malfunction is detected,
the warning unit will warn you of a fault. The system will still
operate, but
may not function normally
. (See
troubleshooting section for explanation of diagnostics
Содержание Park-Pro HD
Страница 1: ...Form 5299 Rev B 07 27 12...
