Rostra
Precision
Controls, Inc.
AUTOMATIC NIGHT TIME SCREEN DIMMING
ONE- TOUCH DISPLAY MODE
In dark environments or at night the screen will automatically reduce the
brightness level for better viewing. This level can be adjusted in the settings
menu.
In daytime and bright environments the screen will increase the brightness
automatically for better viewing.
Note:
When direct sunlight or headlamps shine into the mirror this may wash
out the picture and the ability to see your image.
REARSIGHT Rearview
Mirror Monitor
4.3” Ultra Bright Screen
Onstar
One Touch/ Quick View-
Front Camera Input
I n s t a l l / U s e r M a n u a l
The monitor automatically detects the light level with
the photo sensor on the left side of the control
button. Do not block this sensor or this function will
not work correctly.
Warranty
Who is covered?
What is covered?
What is not covered?
This Warranty does not cover the following:
Damage incurred during shipping or transporting the product to the
company or a service center
Elimination of car static or motor noise
Defects in cosmetic, decorative or non-operative structural parts
Costs incurred for installation, removal or reinstallation of the product or consequential
damage to accessories or vehicle electrical systems
Damage caused by improper installation, mishandling, misuse, neglect, accident, blown
fuse, battery leakage, theft or improper storage
Products whose factory serial number/bar code label(s) or markings have been removed
or defaced
Limitations
Obtaining Warranty Service
The Company extends this warranty to the original retail purchaser of products purchased
through an authorized installation retailer in the U.S.A., Puerto Rico or Canada. This
warranty is not transferable or assignable. Proof of purchase is required in the form of an
original sales receipt.
The Company warrants that should this product or any part thereof, under normal use, be
proven defective in material or workmanship within 36 months from the date of original
purchase, such defect(s) will be repaired or replaced with a new or reconditioned product
(at the Company's option) without charge for parts and repair labor.
Damage resulting from moisture, humidity, excessive temperature, extreme environmen-
tal conditions or external natural causes
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S
LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE
LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF
ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
MUST BE BROUGHT WITHIN A PERIOD OF 36 MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the
Company any liability other than expressed herein inconnection with the sale of this
product.
Some states do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damage so the above limitations or
exclusions may not apply to you.
This Warranty gives you specific legal rights and you may also have other rights which
vary from state to state.
To obtain repair or replacement within the terms of this Warranty, return to the installing
dealer for service.
Rostra Precision Controls, Inc. (“the Company”) is committed to quality and customer
service, and are pleasedto offer you this Warranty. Please read it thoroughly.
AUTO-DIMMING
COMPASS (OPTION)
Auto-dimming rear-view mirrors increase driving safety by eliminating glare
that can inpair vision. In auto-dimming technology, a forward-looking sensor
detects low ambient light from headlights behind the car and directs the
rear-view sensor to look for glare. The mirrors darken automatically in
proportion to how bright the glare is, then clear once the glare is no longer
detected.
the light sensor from the back of
mirror detects the ambient light
front light sensor detects the light
from rearward-approaching vehicles.
When a second camera such as a Front camera is connected you can
select this input by pressing the button for 2 secods one time for on, one
time for o
ff
. The 2nd input will shut o
ff
in 20 seconds after the button
is pushed.
While in Reverse mode if you fast press the button the brightness
control will display and each press will increase the brightness. Contin-
ue to press and it will cycle through to low again.
If you place the car in reverse while the 2nd video display is selected
the monitor will still automatically switch to the reverse camera for the
drivers safety.
12
14
16
18
22
26
24
12
14
16
18
22
24
26
28
34
44
54
66
2
4
6
8
-2
-4
-6
-8
-12
-14
-1
6
-1
8
-12
-14
-16
-2
-4
-6
-8
2
4
6
8
12
14
16
18
22
24
26
-2
-4
-6
-8
-1
2
-1
4
-1
6
-1
6
2
4
6
8
12
14
16
18
USA
Canada
Brazil
Peru
Chi
le
Ary
ent
ina
RUSSIA
CHINA
South
Africa
Australia
Britain
Franch
Spain
Ge
rma
ny
sweden
印度
los
Angeles
A
-1
8
-2
2
-24
-2
6
-2
8
-3
2
-3
4
-3
6
-3
8
Press the button five times to enter into “SETTING” menu, and press
button to choose the “TEMP UNIT”. press you can switch
o
F to
o
C.
Temperature sensor installation
1. Press the button four times to enter into “SETTING” menu, and press
button to choose the “ANGLE”. you can press to adjust the
angle. You can find out the compass angle of your area conference 5-1.
2. Press to select the “CALIBRATION”, the default mode is “OFF”, press
, select the “AUTO”.
3. Drive your vehicle in at least 2 circles' counterclockwise, allowing 90
seconds to complete one circle.
4. For best calibration, keep your circle radius close to 5 meters and speed
less than 3km/h.
5. Press to select the “CALIBRATION”, press , select the “OFF”.
COMPASS
ANGLE
00
OFF
00
CALIBRATION
ANGLE OFFSET
Before
Calibrating
After
Change "CALIBRATION" to "OFF"
after finish circles.
We do not recommend to use compass in the area where the magnetic
lines of flux is intensive. For example, the north of Canada.
New York: -13
Ottawa: -15
Canberra: 12
Beijing: -7
NewDelhi: 1
DuBai: 2
Paris: 0
Moscow: 10
Capetown: 16
Berlin: 4
Sao Paulo: -20
Losangeles: 4
2 circles
speed<10km/h
counterclockwise
Ensure there's no
large container
truck or large truck
The "CALIBRATION" should be
"OFF"before testing in running
car.
Set "CALIBRATION" to "AUTO",
then drive the car anticlockwise
for two circles.
TEMPERATURE (OPTION)
Locate the temperature sensor between the front of the radiator and the front
bumper. Locate edge of sheet metal or plastic shield, and slide metal clip
over edge until secure.
Sensor should be in the flowing of fresh air. Do not locate it next to a heated
engine part.
TEMPERATURE
TEMP UNIT
O
C
00
TEMP OFFSET
How switch the unit of temperature
The temperature of engine should not impact the
function of the temperature sensor if it install in this
position.
5-1
3KDTXXX
*OnStar and the OnStar emblem are
registered trademarks of OnStar, LLC.
