20
3.14 GPS Setting (Requires Optional GPS Antenna)
●
GPS Status
：
GPS Not Found: No GPS found on the DVR.
GPS Gprms: DVR got “GPRMC” data from GPS, but
the GPS signal is not good.
GPS OK: GPS working correctly.
●
GPS OSD: If this option is turned on, the GPS data (latitude and longitude) will be displayed and
record with video.
●
GPS OSD: If this option is turned on, the GPS data (latitude and longitude) will be displayed and
record with video.
●
Sync with GPS Time: When this option is turned on, the DVR will synchronize with GPS time.
●
GPS Baud rate: The communication bard rate between GPS and DVR. The default value is 9600.
3.15 G-Sensor
●
Instant Value: It shows the current value from G-Sensor in axis X, Y, and Z. Due to the gravity,
if the DVR is put horizontally, the initial value of axis Z will have about 1.0G, and the value will
be about -1024.
●
Initial Offset: The “Initial Offset” is used to
set the G-Sensor value at initial installation. Use this
to set the device shock sensor after mounting the DVR. Select CORRECTION then Select APPLY
to set the initial G-Sensor Position after mounting.
●
Alarm Threshold: The “Alarm Threshold” is used to set the threshold to trigger
the alarm. If the
difference between “Instant Value” and “Initial Offset” is larger than “Alarm Thresh
old
,”
the DVR
will trigger a G-Sensor alarm.
●
Alarm OSD: Set the title displayed and recorded on the screen when there is a G-Sensor alarm.
●
Alarm Record: Set up the G-Sensor alarm recording.
