- Optional Mount 250-8132 Not Included
1: Find a location for the mount, Rostra does not recommend using mounts with double sided
tape on 9" monitors. The Monitor may come loose and be a hazard or get damaged. If
using this type of mount, use screws to securely attach the base.
Self tapping Screws
or nuts and bolts are recommended
2: Slide the T-Bolt into the slot in the
rear of the monitor. Do Not use the
u-bracket when using a slid mount.
3: Adjust To the required level.
1: Remove the U-Bracket from the Monitor. Find a location that is desired for proper viewing.
Before mounting the bracket insure the Monitor doe not block any safety device or the drivers view.
2: Mount the U-Bracket securely uing self tapping screws or nuts and bolts (not provided).
3: Re-attach the monitor to the bracket and adjust to a desired viewing angle. Tighten the
thumb screws to insure the monitor is secure.
06
05
