Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.com
Page
3
Camera Mounting Options
Camera Mounting Option 1
Camera Mounting Option 2
If the camera orientation above is desired, make no cuts
whatsoever to the green and white wires attached to the
camera harness when completing the installation. This
option will provide a properly oriented video feed with
gridlines.
If the camera orientation above is desired, the
White
Wire
from the camera harness will need to be cut and
isolated in order to flip the video image upright (see
below). This option will provide a properly oriented
video feed with gridlines.
Camera Gridlines and Video Display Adjustment
Cut the white wire and isolate both halves of the wire to
flip the video image to match the orientation of the camera
(see above).
Cut the green wire and isolate both halves of the wire to
disable the gridlines overlaid onto the video feed of the
camera by default.
