switch manual light-emitting
In Auto flash mode, lightly touch Auto flash button, the device will be
switched to manual flash mode.
8.
.Keep the light outlet close to the area where you need to remove
the hair, and try to place the device at a 90° angle on the
skin
①When the device is in manual mode, wait for the indicator lights
up, press and release the flash button to emit the flashing light, the
treatment is finished for the area covered by the light outlet. Move
the light outlet to next area that need to be depilated, repeat the
steps above. It is recommended to flash each part 2-3 times, but no
more than 3 times.
②When the device is in th
e Auto flash mode, no need to press the
flash button, the light will flash automatically, the treatment is
finished for the area covered by the light outlet. Move the light
outlet to next area to be depilated, repeat the steps above, it is
recommended to flash each part 2-3 times, but no more than 3
times.
9.
. After the treatment is finished, long press the power button for
2 seconds to turn the device off. The device will shut down
automatically when no treatment in 5 minutes.
10.
Unplug the adapter, and remove the adapter from the device power
outlet.
11.
20 minutes later, when the surface of light outlet is cool, wipe the
light outlet with a non-alcoholic wipe or soft tissue.
26