11
12
Hold Handlebar E, Fit Square Hole [10] of Handlebar over Share Steering
Shaft [11] as shown.Use screwdriver to install the N(screw arbor) to
handlebar center, screw it in clockwise.Do not over-tighten. Gently pull up
on handlebar to check that it is secure.
Step 4: Install handlebar
Step 5: Install
instrument cover
[10]
[11]
[11]
E
N
Press F (instrument cover) firmly into the corresponding position on the car
body.
F
Step 7: Install seat
Press K (seat) firmly into the corresponding position on the car body, make
sure the two hood fasteners on the rear of the seat press into the
corresponding holes on the car body.
Then use screwdriver to tighten the
screw at front of seat.
Connect terminal and
to swith on the power,
then install the seat again.
step6:
Power
connection
K
