Maintenance and Care
⚠
Ensure the power to the eQuad is turned off before performing
any maintenance or cleaning
⚠
Brake adjustments
Not all riders will have the same hand strength and the brakes should be adjusted so
the rider is capable of engaging them properly.
⚠
Failure to inspect and properly adjust brakes increases the risk of
having an accident. Riding with worn brake pads can reduce braking
performance and cause an accident. Check and adjust brakes if
needed before each ride.
⚠
Step 1 - To adjust the brake cable turn the adjuster on the brake lever clockwise to
loosen or counterclockwise to tighten.Only turn in small increments until desired
adjustment is reached. If adjusting this way doesn’t help and your brakes are still too
tight or loose proceed to Step 2.
Step 2 - If your brake cable is still too loose after making adjustment at the lever you
will need to manually adjust the length of the cable. Using a 10mm wrench loosen the
nut securing the brake cable pinch bolt (a) and adjust the length on the cable (b), this
may require pliers. Ensure the pinch bolt nut is securely fastened once the
adjustment is made.
10
