3. With the valve closed,
press the bulb and con-
tinue pumping to a val-
ue 30-40 mmHg above
your normal blood pres-
sure. (Fig. 3)
4.
Open the valve to de-
flate the cuff gradually
at a rate of 2-3 mmHg
per second. (The defla-
tion rate is displayed on
LCD.) (Fig. 4)
5. Record the onset of Ko-
rotkoff sound as the sys-
tolic pressure, and the
disappearance of these sounds as diastolic pressure.
6. After measurement is completed, fully open the valve to
release any remaining air in the cuff. The heartbeat rate is
displayed on the LCD. (Fig. 5)
4. Using the correct cuff size is important for an accurate
reading.
5. Display Explanations
7. Applying the Cuff
3. Blood Pressure Standard
1. Introduction
4. Name/Function of Each Part
2. Preliminary Remarks
Attention:
Consult the accompanying documents.
Please read this manual carefully before
use. Please be sure to keep this manual.
Mandaus II complies with the European regulations and bears
the CE mark "CE 0366". The quality of the device has been
verified and conforms to the provisions of the EC council di-
rective 93/42/EEC (Medical Device Directive), Annex I essential
requirements and applied harmonized standards.
EN 1060-1: 1995/A1: 2002 Non-invasive sphygmomanometers
- Part 1 - General requirements
EN 1060-3: 1997/A2: 2009 Non-invasive sphygmomanometers
- Part 3 - Supplementary requirements for electro-mechanical
blood pressure measuring systems
8. Measurement Procedures
1. Place the stethoscope head over the
main artery, underneath the artery
mark of the cuff. (Fig. 1)
2.
Press the “ ” key. After zeroing,
Mandaus II is ready to measure. (Fig.
2)
Thank you for choosing Rossmax Mandaus II, the shock and
splash resistant backlighted digital sphygmomanometer. Blood
pressure measurements determined with Mandaus II are equiv-
alent to those obtained by a trained observer using cuff/stetho-
scope auscultation method.
Mandaus II is protected against manufacturing defects by an
established International Warranty Program. For warranty infor-
mation, you can contact the manufacturer, Rossmax Interna-
tional Ltd. or your local distributors.
The
National High Blood Pressure Education Program
Coordinating Committee
has developed a blood pressure
standard, classifying blood pressure ranges into 4 stages.
(Ref. The Seventh Report of the Joint National Committee on Prevention, De-
tection, Evaluation, and Treatment of High Blood Pressure-Complete Report
JNC-7, 2004)
.
This blood pressure classification are based on historical data,
and may not be directly applicable to any particular patient.
It is important that you consult with your physician regularly.
Your physician will tell you your
normal blood pressure range
as well as the point at which
you will be considered at risk
before making any healthcare
decision based on the device's
readings.
For reliable monitoring and
reference of blood pressure,
keeping long- term records is
recommended. Please down-
load the blood pressure log
(chart for recording and track-
ing crucial info: date, time,
blood pressure, pulse rate and
body condition) at www.ross-
maxhealth.com.
Arm Cuff
Air Tube and
Connector
Inflating
Bulb
Air
Release
Valve
Back light key
On/Off/Zeroing key
Carrying Case
Stethoscope
Index Line
Artery Mark
Arm Circumference Indicator
1. Blood Pressure
2. Deflation Rate (During Measurement)/
Heartbeat Rate (After Measurement)
3. Heartbeat Mark
4. Weak Battery Mark
5. Error Mark
6. Calibration Reminder
1
2
4
3
5
6
1
2
4
3
5
6
6. Installing and Replacing the Batteries
1. Rotate the clip through 90 °.
2. Loosen the screw on the battery cover.
3. Install the batteries with correct polarities.
4. Replace the battery cover and tighten the screw.
5. Rotate the clip back.
You need to replace the batteries when:
1. low battery icon appears on display.
2. the On/Off/Zeroing key is pressed and nothing appears on
display.
Caution:
1. Batteries are hazardous waste. Do not dispose them
together with the household garbage.
2. There are no user serviceable parts inside. Batteries
or damage from old batteries are not covered by
warranty.
3. Use exclusively brand batteries. Always replace with
new batteries together. Use batteries of the same
brand and same type.
1
2
4
3
5
6
1. Plug the connector into the gauge
and twist clockwise to secure the
connection.
2. Place the cuff over the bare upper
arm, wrap it with the tube point-
ing your palm, and the artery mark
over your main artery.
Applicable cuff circumferences
Rossmax Gauge Cuffs
Young Adult (S)
18 - 26 cm (7.0”-10.3”)
Adult (M)
24 - 36 cm (9.5” – 14.2”)
Large Adult (L)
34 - 46 cm (13.4”-18.1”)
3. The edge of the cuff
should be at approximate-
ly 1.5 to 2.5 cm above the
inner side of the elbow
joint. If the index line falls
within the range of the
arm circumference indica-
tor, the cuff circumference
is suitable, otherwise you
may need a cuff with a dif-
ferent circumference.
5. To stop operation at any time, open the air release valve,
and the air in the cuff will be rapidly exhausted.
1
2
4
3
5
6
1
2
4
3
5
6
Fig. 1
Fig. 2
Fig. 3
Fig. 4
1
2
4
3
5
6
1
2
4
3
5
6
Fig. 5
1
2
4
3
5
6
1
2
4
3
5
6