Rossle BISAM 22 BRUSH, Руководство по эксплуатации

Страница: 11 / 16

T e c h n o l o g y f o r c l e a n p o n d s
Mounting the brush head on to the telescopic rod
When mounting the brush head pay careful attention to the spiral cable attached to the end of the rod
with a Velcro fastener. When releasing the Velcro fastening be very careful not to let go of this cable, but
make sure you immediately screw the connector onto the brush connection.
Attention! If you let go of the cable fastening before connecting the brush, the cable could slip back into
the telescopic rod. After connecting up the cable, push the adaptor of the BISAM 22 BRUSH into the
telescopic rod together with the cable and fix it with the wing nuts. Keep the velcro fastener and when
dismounting the equipment, use it to attach the cable back onto the rod as before.
Mounting the power unit with the speed control unit and the
telescopic rod
First connect the power unit to the speed control unit and then to
the telescopic rod. Make sure that the connections are attached
exactly and secured with the lock nut. Please do not hold or turn the
connector at the blue end.
Mount the battery with the speed control unit and the
telescopic rod
First connect the battery to the Speedcontrol and then to the teles-
copic pole. Make sure that the plug connections are inserted exactly
and secured with the lock nut. Please do not hold or turn the con-
nector by the blue ends.
Attention!
Make sure that the power supply unit does not fall into water, it will void the warranty and there is a risk
of electric shock. If necessary, fix the power pack to a pole or something similar with velcro tape or cord
on dry ground.
11