manualshive.com logo in svg

Rosslare InteliDoor AC-Q41H, Инструкция по эксплуатации

Поделиться
Скачать
Rosslare InteliDoor AC-Q41H Скачать руководство пользователя страница 11

Page 20

07/04

AC-Q41H

Programming the AC-Q41H

Programming the AC-Q41H is done solely via the unit's keypad 
driven Programming Menu System. To reach the Programming 
Menu System the AC-Q41H must first be placed into Programming 
Mode. See "Entering Programming Mode" on Page 22 for more 
information.

During the AC-Q41H's manufacturing process certain codes and 
settings are pre-programmed. These settings are the called the 
"Default Factory Settings".

The table below shows the names of all the AC-Q41H menus. It 
also shows of all the AC-Q41H's default factory codes and settings.

Programming  Menu

2580

Change Open Code

1

0852

Change Auxiliary Code

2

1234

Change Program Code

3

3838

Change Normal / Secure Code

4

Change Normal / Bypass Code

5

0004

Change Lock Strike Release Time

6

2004

Define Auxiliary Inputs / Outputs

6

3000

Enable or Disable Keypad Heater                        6

                      Enroll Proximity Cards, PIN Code or both.

7

Delete Proximity Cards or PIN Code

8

Code Assignment with Strike/Auxiliary

9

Return to Default Factory Setting

0

You will find a complete description and instructions for each of the 
above menu items on the following pages.

Menu Description

Factory

Settings

Menu

Number

Page 21

07/04

AC-Q41H

BL-D40 External Sounder

The BL-D40 External Sounder is designed to operate indoors and 
installed within the premises to be secured. The Sounder can be 
powered by 16 to 24V DC power supply or by 16 to 24V AC from a 
transformer.

The BL-D40 is capable of emitting four different types of alerts both 
audible and visual; Bell, Door Chime, Siren, and Strobe Light.

1)

 The Bell always sounds when the controller's door bell button 

is pressed.

2)

 The Door Chime can be programmed to sound whenever a valid 

code is entered.

3)

 The Siren can be programmed to sound when the case of the 

controller is tempered i.e. opened or when the controller is 
removed from the wall. The controller can also program the 
length of the Siren time in the BL-D40.  

The Controller communicates with the BL-D40 using a coded 
proprietary Rosslare communications protocol. This provides a 
secure link between the Controller and the BL-D40.

If the BL-D40 receives any unrecognized codes on its 
communication line or communication between the controller and 
the BL-D40 are severed, the Strobe will flash repeatedly until the 
communication problem has been resolved.

Содержание InteliDoor AC-Q41H


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды