Reader Operation
AYC-F/G/M60 Series Installation and Programming Manual
29
4.2.7
Changing the Facility Code
•
The Facility code can be in the range of 000 to 255.
•
The default Facility code is 0.
To change the Facility code:
1.
Enter Programming mode.
2.
Press
4
to enter Menu 4.
The left LED turns red.
3.
Enter the new 3-digit Facility code.
You hear three beeps.
The system returns to Standby mode.
4.2.8
Setting the Backlight Behavior
To set the backlight behavior:
1.
Enter Programming mode.
2.
Press
6
to enter Menu 6.
The left LED turns red.
3.
Enter one of the following codes:
10
– Always off
11
– Always on
12
– Backlight is off, activates for 10 seconds when a key is
pressed, after which it dims until off
13
– Backlight is dimmed, activates for 10 seconds when a
key is pressed, after which it returns to a dimmed level
Red Green
Green
Red
Red Green
Green
