Programming the AY-Dx9M
AY-Dx9M Family Installation and Programming Manual
25
3.
Enter the new 3-digit code you wish to
set as the Facility code.
One beep is emitted on success.
The system returns to Transmit mode.
Facility codes can be in the range between 000 and 255.
5.7
Return to Factory Default Settings
You must be very careful before using this command! Doing so
erases the entire memory, which includes all user and special
codes. In addition, all codes are returned to their factory
default settings.
To return to factory default settings:
1.
Enter Programming mode.
2.
Press
0
to enter Menu 0.
The Mode LED and the Program LED
flash red.
3.
Enter your 4-digit Programming code.
If the Programming code is valid, all memory is erased. You hear
three beeps and the controller returns to Normal mode.
If the Programming code is invalid, you hear a long beep and the
controller returns to Normal mode without erasing the memory of
the controller
Mode
Prog
Red
Mode
Prog
Green
Mode
Prog
Red
Red
