AY-B9250BT User Guide
59
When authentication successes, it repeats and play voice guidance.
Card Test
As you see below, the screen displays “INPUT CARD” state at first.
When recognizing the card, “Success” screen displays and it returns “INPUT CARD” state
again. If you want to stop testing, press
F2
.
FP Sensor Test
FP Sensor Test is used to test the operation state of FP sensor from terminal.
Input your fingerprint twice, if they are same, it shows “Success” screen.
Otherwise, if not, it shows “Failure” screen.
Camera Test
It is used to check whether the camera state is normal in the terminal to capture photos.
LED Test
It is used to check whether the state is normal about RED, GREEN and BLUE LED used to
inform the operation state.
At intervals of 2 seconds, RED, GREEN and BLUE LED changes from ON to OFF.
