AY-B91x0BT User Guide
10
3.
Environment Setting
3.1. Terminal Setting
3.1.1. Setting via Rosslare Bio9000
Card Format
The type of card to be used can be set.
Settings
Display Method
No Use
Do not use the card authentication
EM
Use a low-frequency (125 kHz) EM card
MIFARE
Use a high-frequency (13.56 MHz) MIFARE card
Wiegand Output
This mode is available if the terminal is equipped with a separate controller operated by Wiegand input.
Settings
Display Method
No Use
Do not use the Wiegand communication
26Bit
Perform the Wiegand communication by a format of 26-Bit
34Bit
Perform the Wiegand communication by a format of 34-Bit
Device Mode
If reader mode is selected, Wiegand output is Card Number when authentication is Success.
If access control is selected, Wiegand output is User’s ID when authentication is Success.
Sitecode
Set the value of Sitecode to transfer upon Wiegand output.
If Wiegand output is 26bit, a value of 0 to 255 can be set. If Wiegand output is 34-Bit, a value
of 0 to 32767 can be set.
Ext 485
Can select external RS-485 device.
485 ID
Can assign ID of External RS-485 device to 0-7.
1:N Level
When 1:N authentication, set the verification level to 5-9.
1:1 Level
When 1:1 authentication, set the verification level to 1-9.
Max ID Length
This indicates the length of ID which can be entered to the maximum.
Network Mode
Set whether the terminal is used to either a standalone mode or a network mode.
Node ID
Set the terminal ID to add to ACM Pro in the range of 1 to 2000.
Use DHCP
Set whether to use a static IP.
