Rosslare AuraSys L-2, Руководство по установке оборудования, Страница: 15 / 34

Wiring Instructions
AuraSys™ L-2 and L-2K Installation Manual 15
4. Wiring Instructions
This section instructs you on how to wire the L-2/2K system and describes the
preliminary test performed after completing wiring the system.
4.1 Wiring Quick Reference
The PCB board and components, as well as general connections from the
control panel PCB to other panel components, are shown below:
Figure 4: L-2/2K Control Panel Components
Connector Function
+ BAT – BT-05/16 battery connector
VIN AC/DC Power input for AC/DC Voltage
+ Bell - Bell/Siren connection
PGM
Programmable open collector output
+ AUX -
12 VDC power supply for external devices
Z1…Z2 Zones 1 and 2 input connections
- Common (ground)
Line Tip and Ring connection for phone line in
Phone Tip and Ring connection for phone line out
PC connection MD-62 connection to AuraSys PC software