Rossi BT-280 Скачать руководство пользователя страница 8

Страница: 8 / 10

12V/24V Heavy-Duty Battery Charger

E&OE

Charging a Battery

Do NOT use "Boost" charge mode for longer than necessary to "revive" the battery. A
battery may be permanently damaged if over-charged.

Calculate charge time

before

charging.

• For batteries in vehicles, consult the vehicle manufacturer instructions for connecting a charger to

the battery.

Failure to correctly follow the vehicle manufacturer instructions for in-vehicle charging

may damage vehicle electronics

• For batteries connected in series, consult a automotive electrician for

advice on how to charge the batteries.

1. Connect the

POSITIVE

charging cable to the required output connection terminal

(+12V or +24V) on the charger. To attach the cable, remove (rotate left) the
terminal nut (

), then place the "eye" of the cable connector (

) onto the terminal

screw (

). Re-install the terminal nut (rotate right) and tighten firmly by hand.

2. Connect the

POSITIVE

clamp to the battery

POSITIVE

terminal, the connect the

NEGATIVE

clamp to the battery

NEGATIVE

terminal.

3. Connect the charger to a 240VAC electrical supply and switch the supply ON.

4. Switch the battery charger ON at the

OFF

switch.

5. Set the

Charge Mode

switch to

MIN

for "normal" battery charging. Set to

BOOST

if the connected

battery is discharged to the point that normal charging cannot be used.

6. Set the

Charge Rate

switch to

for batteries under 200Ah, or

for batteries over 200Ah.

7. Set the

Charger Mode

switch to

To stop charging:

1. Switch the battery charger OFF at the

OFF

switch.

2. Switch the electrical supply to the charger OFF.

3. Remove the clamp from the

NEGATIVE

terminal, then remove the clamp from the

POSITIVE

terminal.

Jump-Starting

Consult the vehicle manufacturer instructions for jump-starting.

Failure to correctly follow the

vehicle manufacturer instructions for jump-starting may damage vehicle electronics

1. Connect the

POSITIVE

charging cable to the required output connection terminal (+12V or +24V) on the

charger.

2. Connect the

POSITIVE

clamp to the battery

POSITIVE

terminal, the connect the

NEGATIVE

clamp to

the battery

NEGATIVE

terminal.

3. Connect the charger to a 240VAC electrical supply and switch the supply ON.

4. Switch the battery charger ON at the

OFF

switch.

5. Set the

Charge Mode

switch to

BOOST

6. Set the

Charge Rate

switch to

7. Set the

Charger Mode

switch to

8. Start the engine. Do NOT crank the engine continuously for more than 3 seconds. If the engine fails to

start, set the

Charger Mode

switch to

, and charge the battery for a minimum 15 minutes.

9. Switch the battery charger OFF at the

ON / OFF

switch, then switch the 240VAC electrical supply to the

charger OFF.

10. Disconnect the charging cables

–

NEGATIVE

first, then

POSTIVE

ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI

Содержание BT-280











Результаты поиска

Содержание BT-280

Отзывы:

Rossi BT-280, Руководство пользователя, Страница: 8 / 10

Результаты поиска

Содержание BT-280

Отзывы: