Rossi Bi KXH1024FS Скачать руководство пользователя страница 4

 

  

Follow each one carefully: 

 

1 - The installer must follow all instructions contained in this manual.

 

2 - Keep automatic equipment controls (control buttons, remote control etc.) out of reach of children. 3 - Perform control 
operations from points where the automatic gate is visible.

 

4 - Use remote controls only if you can see the automatic gate.

 

5 - Warning: ROSSI assumes no liability for any damage caused by non-observance, at the time of installation, of safety regulations and laws currently in force. NBR 
5410:1997 - ABNT - Associação Brasileira de Normas Técnicas.

 

6 - This manual is intended exclusively for specialized personnel who are aware of the manufacturing criteria and the accident protection devices related to motorized gates 
and doors.

 

7- If not provided for the switchboard, install beforehand a bipolar disconnect type switch with a minimum contact opening of 3mm, 

of a mark which complies with international standards and provide for the 

equipment grounding

.

 

8- For cables section, ROSSI recommends using a minimum section of 2.5mm and observing the laws in force in the country. 
9- Keep this manual for future reference

 

10-  This appliance is not intended for use by people (including children) with reduced physical, sensory or mental capacities, or people with lack of experience and 
knowledge, unless they have received instructions regarding the use of the device or are under the supervision of a person responsible for their safety.

 

11- It is recommended that children be supervised to ensure that they are not playing with the device.

 

12- The installer must provide all information regarding automatic operation, emergency unlocking and deliver the user manual with the appropriate information.

 

13- It is mandatory to use the active infrared sensor - SIA 30 FS, to activate the anti-locking protection system and allow the FS control unit to operate, avoiding collision 
with obstacles and accidents with people or material goods.

 

14- Before installing the unit, check that the driven part is in good mechanical condition, correctly balanced and opens and closes correctly

 

15- Check the installation frequently to detect imbalances and signs of wear or damage to cables, springs and assembly. Do not use in case of repairs or if adjustment is 
required.

 

16- Disconnect the equipment from the power when cleaning or maintening.

 

17- Check if the temperature of the equipment is indicated and where it will be 

used.  
18- Product for low flow sliding and tilting residential and condominial.

 

 

 

Warranty term

 

This product has been designed and manufactured to 

fully meet the technical specifications described in the 

booklet that comes with it. 

It is IMPORTANT that this term is read, as well as the 

entire User Manual and the technical specifications of 

the product and instructions for its correct installation. 

INDÚSTRIAS ROSSI ELETROMECÂNICA LTDA, 

in accordance with Law 8078/90, certifies that the 

product is in perfect conditions of use and suitable for 

its intended purpose, ensuring it against any defect in 

the design, manufacture or quality defect of the 

material that makes it improper or inappropriate to the 

use for which it is intended, for a period of one (1) year, 

including the legal warranty period of 90 days, counted 

from the issue date of the Invoice to the consumer. 

|||UNTRANSLATED_CONTENT_START|||Quando o 

consumidor se deparar com algum eventual defeito de 

fabricação dentro do prazo de garantia, deverá entrar 

em contato com os dados da Nota Fiscal de compra, 

podendo também localizar no site um distribuidor: 

http://www.rossiportoes.com.br/ondeencontrar para que 

seja realizada a avaliação do 

produto.|||UNTRANSLATED_CONTENT_END||| 

The warranty will be totally invalid if any of the following 

situations occurs: 

a) If it is found that the defect is not of manufacture; 

b)  If it is found that the defect of the product was 

caused by misuse or improper use, fortuitous or force 

majeure (lightning, flooding, flooding, landslides, etc.), 

a defect in the electrical network. 

c)  If it is found that the defect of the product is due to 

exposure to chemicals, 

electromagnetic interference, air pollution, excessive 

humidity and/or intense heat and cold; 

d)  If it is found that the product defect was caused by 

accidents, falls, attacks by pests or agents of nature; 

e) If the manufacturing label has been removed from 

the product; 

f)  If the product has been violated and/or suffered 

modifications made by third parties not authorized by 

INDÚSTRIAS ROSSI ELETROMECÂNICA LTDA; 

g) If the product undergoes natural wear, due to 

failure to follow the instructions for use and 

maintenance in the User Manual; 

h) If it is found that the product's unsatisfactory 

performance originates from an improper installation, 

in disagreement with NBR 5410: 1997 -  ABNT  - 

Brazilian Association of Technical Standards 

(Associação Brasileira de Normas Técnicas) and with 

the instructions accompanying the product, or the 

electrical network where it is connected (see 

technical specifications of the equipment) 

i) If the product is being used in an application for 

which it has not been designed or exceeds the 

maximum operating cycle causing the engine to burn 

or the wear of internal components; 

ATTENTION! The product installation must follow the 

instructions that accompany the product, under 

penalty of invalidation of this guarantee. The 

expenses necessary for the installation, as well as 

the purchase of materials necessary for the 

installation, besides optional resources, will be the 

responsibility of the consumer. 

ATTENTION! It is indispensable, under penalty of 

invalidation of this guarantee, the use of the Active - 

SIA 30 infrared sensor to activate the anti -  locking 

protection system. The absence of this sensor can 

lead to collision with obstacles, accidents with 

people, animals or property. 

ATTENTION! Keep children and pets away from the gate 

at the time of its operation. ATTENTION! The product 

has been developed for generic use, not for the specific 

purpose of each consumer. Therefore, this warranty is 

limited to meeting the purposes set forth in the User 

Manual. ATTENTION! If the equipment is defective, 

immediately seek the technician who installed the 

equipment through the address and telephone number 

filled in or stamped on this certificate. 

INDÚSTRIAS ROSSI ELETROMECÂNICA LTDA, 

reserves the right at any time to modify and/or 

introduce improvements to this product without 

incurring an obligation to do the same for products in 

stock or already sold. 

 

 

   Customer service: 

 

www.rossiportoes.com.br 

Resale Stamp

 

 

 

 

 

 

 

 

 

 

 

 

 
 

 

INDÚSTRIAS ROSSI ELETROMECÂNICA LTDA - CNPJ (Corporate Tax Number): 00.736.546/0001-05 - IE: 07.320.161/001-42

 

ADE Conj. 05 Lts 29/30 - CEP:71987-180 - Águas Claras-DF Brasil - Fone: (61) 3399 8787

 

[email protected] - 

www.rossiportoes.com.br 

Pag.04

 

Important Safety Instructions 

For the safety of people, it is important that all instructions are followed. 

Содержание Bi KXH1024FS

Страница 1: ...e U output The outputs V and W determine the motor rotation direction right left To do this test leave the gate in the middle of the path far from the end of the course and press the LED FF or FA will flash indicating the direction of rotation of closing or opening The control unit automatically understands the two end of course systems by contact reed and or hall without programming NOTE You shou...

Страница 2: ...FA is reached the ST LED will start flashing in 1 second intervals allow the desired time to elapse for the pause value and give the control again Each flashing indicates 1 second elapsed until 12h E g If the LED blinks 20 times the pause time will be 20 seconds After this operation is completed the pause will be programmed every opening that occurs and elapses in the programmed time will automati...

Страница 3: ...n process the system will be interrupted and the process of step 2 SETUP must be restarted 5 In step 2 if the gate is not in the end of stroke the plate moves the gate to a stroke end and then completes a full opening and closing cycle 6 If the magnet has to be repositioned it will be necessary to redo the path of step 2 SETUP 7 The control unit has a thermal protection feature if it reaches a tem...

Страница 4: ...onsumidor se deparar com algum eventual defeito de fabricação dentro do prazo de garantia deverá entrar em contato com os dados da Nota Fiscal de compra podendo também localizar no site um distribuidor http www rossiportoes com br ondeencontrar para que seja realizada a avaliação do produto UNTRANSLATED_CONTENT_END The warranty will be totally invalid if any of the following situations occurs a If...

Отзывы: