NEED ASSISTANCE?
Please contact our customer service support at (847) 763-1215
and we’ll be happy to assist with any assembly questions,
comments, or concerns.
ROSSETO
®
3714 Jarvis Avenue, Skokie, IL 60076
Visit our website at www.rosseto.com
EZ-SERV® Wall Mount Dispenser
SETTING UP YOUR PRODUCT
METAL BRACKET
g. HANDLE
ITEM # EZH010
f. LABEL HOLDER
ITEM # EZM036
1.
Carefully remove all parts from packaging and poly bags.
2.
Make sure you have all parts listed before discarding packaging.
3. Consult your contractor about what mounting hardware (not included) to use,
depending on the type of wall you have. See Page 2 for bracket dimensions.
4. Mount EZ-SERV® metal bracket where desired, making sure it is affixed
securely to the wall.
5. Fill containers with desired dry product and seal with the lid.
6. Hold the container above the stand with the handle facing you. Carefully lower
the container down to the metal opening, tilted at an angle that allows the
handle to clear through first. The back of the container has a small notch that
aligns with an indent on the bracket to prevent movement from side to side.
7. Once the handle is cleared through the metal opening, you may tilt the
container carefully back to a full upright position. Then, gently set the container
down directly on the stand.
8. Repeat Steps 5 through 7 for the remaining containers.
9. Attach label holder (d) to bracket as shown in FIGURE (A).
10. Dispense as you please!
e. CONTAINER SHELL
ITEM # EZC017 - .65 Gal.
ITEM # EZC015
- 1.3 Gal.
ITEM # EZC027 - 2 Gal.
ITEM # EZC040 - 2.5 Gal.
ITEM # EZC019 - 3.5 Gal.
Disclaimer: Acrylic container
will come with transparent
plastic film wrap. Please
remove before use.
FIGURE A
NOTE: Recommended label size is 2.35x1.4 IN
c. ITEM #:
EZP021
b. ITEM #:
EZP028
d. ITEM #:
EZP022
EZ538
:
X1, 2 Gal |
EZ540:
X1, 3.5 Gal |
EZ574:
X5, 2.5 Gal
EZ
5
33
: X3, 0.65 Gal |
EZ534:
X5, 0.65 | Gal
EZ523
:
X1, 1.3 Gal |
EZ524:
X2, 1.3 Gal |
EZ525:
X3, 1.3 Gal |
EZ527
: X5, 1.3 Gal
a. LID:
ITEM # EZL015
