Ross YOYAGER X1, Руководство по обслуживанию, Страница: 18 / 62

3–4 • Hardware Overview and Installation Voyager Maintenance Guide (v02)
Voyager SDI Rear Input/Output Connections
The following diagram Figure 3.4 displays the Input/Output portion of the Voyager system. Descriptions of
individual components are contained in the legend below the diagram.
Figure 3.4 Voyager SDI Rear Input/Output Connections
1) Display Ports — Two Display Ports provide output for
computer monitors. Ensure the correct display port to
DVI adapters are used (DIV-D or DVI-I).
2) HDMI Port — One HDMI port (b) provides output for a
computer monitor.
3) USB-C Port — One USB-C port (c) provides output for
a computer monitor.
4) nVidia Quadro Sync II — Two Frame Lock connections
for synchronizing multiple displays.
Connect using
CAT-6 UTP Ethernet cables.
5) Matrox Video Input/Output Cables — Provide SDI
video input and output, as well as an analog reference
point.
Refer to
“Appendix A: Matrox SDI I/O Cables ” on
page A–1 for further information.
OR
AJA Corvid 88 Video Input/Output Cables
— Provide
SDI video input and output, as well as an analog
reference point.
Refer to “
Appendix C: AJA Corvid 88 I/O Cables ” on
page C–1 for further information.