Ross Ultrix 2101DR-008-11, Руководство пользователя, Страница: 19 / 56

Ultrix SFP Modules Guide (v11.0) SFP-HDM-OUT • 19
Recommended Operating Conditions
HDMI TX Characteristics
Mechanical Specifications
Note that specifications are subject to change without notice.
Table 4.5 provides a brief list of the SFP-HDM-OUT mechanical features.
Table 4.2 Absolute Maximum Ratings
Parameter Min. Max. Notes
Supply Voltage 0V 3.6V
Operating Case Temperature -20°C +80°C Measured on the top side of
the module in the center
Storage Temperature -40°C +85°C
Operating Relative Humidity 5% 95% Non-condensing
ESD Rating 8kV IEC61000-4-2 level 4
Table 4.3 Recommended Operating Conditions
Parameter Min. Typical Max. Notes
Supply Voltage 3.13V 3.3V 3.465V
Operating Case Temperature -20°C +80°C
SDI Serial Data Rate 270Mbps 2970Mbps 270/1485/2970Mbps
Table 4.4 HDMI TX Characteristics — Output
Parameter Min. Typical Max. Notes
TMDS Output Clock Freq. 20MHz 150MHz
TMDS Output Clock Duty Cycle 48% 52%
TMDS Differential Swing 800mV 1000mV 1200mV
TMDS Rise/Fall Time 75ps 175ps
Maximum Output Current (5V) 55mA
Output Voltage (5V) 4.8V 5.05V 5.3V
Table 4.5 Technical Specifications — Mechanical Features
Parameter Specifications
Connector Type HDMI 1.4 Type D
Plug Mechanical Retention Custom Design to enable cable mechanical retention
Mechanical release Simple pull up mechanical release system to disengage the
module from its cage