Ross Ultricore RCP-ME, Руководство пользователя, Страница: 43 / 98

RCP-ME User Guide (v4.0) Menus • 43
To assign menu navigation to a button
1. Open the RCP-ME Panel Config interface (see “ To open the RCP-ME Panel Config interface ” on page 22).
2. On the simulated RCP-ME, select the button that you want to use for menu navigation.
The Button dialog opens.
3. In the Button list, select Menu Navigate .
4. Use the Value list to select one of the following options:
• Home — returns to the menu defined in Menu Number 1 on the Menu Details tab.
• Next Menu — goes to the next menu if one is held in the buffer.
• Previous Menu — goes to the previously used menu if one is held in the buffer.
• Up Menu — goes up a menu as defined on the Menu Details tab.
• Down Menu — goes down a menu as defined on the Menu Details .
• XPoint Layer — N/A. Displays XPT DISP on the LCD screen, but has no function.
5. Close the Button dialog.
The simulated RCP-ME in DashBoard shows the type of navigation on the selected button. For example, UP
MENU .
6. Send the current configuration file to the device ( “ To send the current configuration to a panel ” on
page 74).
Returning to the Home Menu
You can use DashBoard to return to the Home menu if the RCP-ME is not responding to button presses.
To return to the home menu
1. Open the RCP-ME Panel Config interface (see “ To open the RCP-ME Panel Config interface ” on page 22).
2. Select the Configuration tab.
3. In the Configuration section, select the Return to Home Menu check box.
4. Send the current configuration file to the device (see “ To send the current configuration to a panel ” on
page 74).
The RCP-ME returns to the Home menu.
Using a Menu
The button corresponding to the current menu is always illuminated.
To use a menu
1. Press the button that has the menu assigned to it.
A brief message is shown on the screen with the name of the menu.( Figure 5.2 )
Figure 5.2 Example of a Menu Name
2. Press the button that you want to use in that menu.
3. If the menu has been set up to fall back to another menu, the RCP-ME goes to the predefined menu.

Use DashBoard to return to the Home menu if the RCP-ME is not responding.
1 2 3 4
MENU LINK
Dsts