manualshive.com logo in svg

Ross Ultricore RCP-ME, Руководство пользователя, Страница: 19 / 98

Поделиться
Скачать
Ross Ultricore RCP-ME Скачать руководство пользователя страница 19

RCP-ME User Guide (v4.0)

Getting Started • 19

When the

 

routing switcher system is powered up, the routing switcher restores its crosspoint status. The RCP-ME 

requests the status of the routing switcher.

 

The routing switcher sends the status of the crosspoints to the RCP-ME.

Installation and Configuration Overview

The generalized workflow of setting up your RCP-ME is:

1. Implement your routing system plan.

2. Physically install the RCP-ME.

Contact your IT department before connecting to your facility network to ensure that there are no conflicts.

3. Configure the network settings for the RCP-ME.

4. Ensure that DashBoard discovers the RCP-ME on your network.

5. Specify the routing mode (virtual or physical).

6. Configure the button layout for your RCP-ME.

Implementing Your System Plan

An effective routing system takes careful planning. If you intend to use multiple router levels across several input 
and output devices, it is recommended that you use common input connectors for each source device across the 
routing switchers and common output connectors for each destination device across the routing switchers. This 
methodology is shown in 

Figure 2.2

. The following process for setting up the RCP-ME is recommended.

Figure 2.2  Flow Chart for Setting up the RCP-ME

Is there an

NK-VRC

in the system?

Enter the connection 

details for the NK-NET 

or the NK-IPS.

Set up the level names, 

and breakaway patterns.

Assign input and output 

labels according to the 

physical connections.

Assign input and output 

labels in the global   

label file.

Enter the connection 

details for the Ultrix 

router or the Ultricore 

Central Controller.

Set up breakaway patterns.

Level names are served 

from the Ultrix router or the 

Ultricore Central Controller.

Label assignments are 

served from the Ultrix 
router or the Ultricore 

Central Controller.

Assign menus and functions to 

buttons on the remote control panel.

Is there an

Ultrix router or

Ultricore Central

Controller

in the system?

YES

NO

YES

NO

Enable

Virtual Routing on

the RCP-ME.

Enable

Virtual Routing on

the RCP-ME.

Содержание Ultricore RCP-ME



































































































Отзывы:

Нет отзывов