Ross Ultricool, Руководство пользователя

Страница: 31 / 36

Ultricool User Guide (v1.0) DashBoard Interface Overview • 31
DashBoard Interface Overview
Ultricool groups the configuration and monitoring features in two areas in the DashBoard client window: Status
(tabs in the left pane of the window), and Configuration (tabs in the right pane of the window). The following
sections outline the fields, menus, and parameters displayed in each area.
Status Tabs Overview
This section summarizes the read-only information displayed in the Status tabs. Some fields in the Status tabs vary
in severity from green (valid), yellow (caution), to red (alarm). DashBoard reports the most severe alarm for a
single field. Alarm colors are noted within the tables as text set in brackets next to the menu parameter name.
Product Tab
Table 10.1 summarizes the read-only information displayed in the Product tab.
Hardware Tab
Table 10.2 summarizes the read-only information displayed in the Hardware tab.
Table 10.1 Product Tab
Item Parameters Description
Device Name # Indicates the name assigned to the device in the
Setup tab
Product Ultricool Indicates the model name of this unit
Supplier Ross Video Indicates the supplier of this unit
Board Rev # Indicates the hardware version of the Ultricool
control module
Board S/N # Indicates the serial number assigned to this unit
MAC Address # Media Access Control (MAC) address for ethernet
connectivity
Software Rev # Read-only information used by Ross Technical
Support
Table 10.2 Hardware Tab
Item Parameters Description
Status RossTalk (Purple) The RossTalk server was started and will adjust the
fan speed as per the received command
Manual override (Yellow) The user selected one of the fixed Fan Mode
settings (Min, Low, Medium, or High). Refer to
Table 10.3 for a list of settings.
Connecting... (Blue) Ultricoolis attempting to connect with Ultrix
Connected to Ultrix (Blue) Ultricool is connected and controlled by an Ultrix