Ross UDA-8005A, Руководство пользователя

Страница: 14 / 24

2-2
•
Installation and Setup UDA-8005A User Manual (Iss. 01)
Board Installation
Use the following procedure to install the UDA-8005A in a RossGear 8000 series digital frame:
1. Refer to the User Manual of the RossGear frame to ensure that the frame is properly
installed according to instructions. If this card is to be installed in any compatible
frame other than a Ross Video product, refer to the frame manufacturer’s manual for
specific instructions.
Notice
Heat and power distribution requirements within a frame may
dictate specific slot placement of cards. Cards with many heat-
producing components should be arranged to avoid areas of excess
heat build-up, particularly in frames using convectional cooling.
2. After selecting the desired frame installation slot, hold the UDA-8005A card by the
edges and carefully align the card-edges with the slots in the frame.
3. Fully insert the card into the frame until the rear connection plug is properly seated.
This completes the procedure for installing the UDA-8005A in a RossGear 8000 series digital frame.
BNC Labels
Affix the supplied BNC label, as per the included instructions, to the BNC area on the rear of the rack
frame.
Cable Connections
The following diagram indicates the input and output connections for coax cables to the UDA-8005A
when mounted in RossGear 8000 series digital frames.
Figure 2. UDA-8005A BNC Designations for RossGear DFR-8110A (2RU Frame)