TEA-8207 User Manual (Iss. 06)
Installation • 2–5
Cabling for the TEA-8207
This section provides instructions for connecting cables to the installed BNC rear modules on the
DFR-8300 series frame backplane. The inputs are internally terminated in 75 ohms. It is not
necessary to terminate unused outputs.
Connections for the DFR-8310 Series Frames
In the DFR-8310 series frame, the TEA-8207 each occupy one slot and provide seven outputs and
three SDI inputs. Connect the input and output cables according to
Figure 2.2
.
Figure 2.2
Cable Connections for the TEA-8207
Connectors for the DFR-8321 Series Frames
In the DFR-8321 series frame, the TEA-8207 each occupy two slots and provide seven outputs
and three SDI inputs. Connect the input and output cables according to
Figure 2.2
.
1
2
3
4
5
6
7
8
9
10
SDI In
Channel A
SDI In
Channel B
SDI Out A
SDI Out A
SDI Out B
SDI Out B
SDI In
Channel C
SDI Out C
SDI Out C
SDI Out B
