Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 284 / 332

9–4 • Custom Controls Synergy Series Operation Guide (v18)
• Special Functions — A custom control button can be programmed to perform a variety
of special functions controlling GPIs, audio external devices, menu retrieval, transitions,
and inserting pauses and holds to the custom control.
• PIP II Functions — A custom control button can be programmed to send messages to
devices using this optional software feature.
• Robotic Camera Functions — A custom control button can be programmed to recall
cameras and specific shots. The Robotic Camera Interface Option must be installed.
• Monitor Wall Functions — A custom control button can be programmed to change
input channels, modify dynamic text and load a specific layout. The Monitor Wall
Interface Option must be installed.
• Audio Server Functions — A custom control button can be programmed to perform a
specific transport command such as play, pause and stop. The Audio Server Remote
Control option must be installed.
Naming Custom Controls
A custom control function can be named for quick reference in the menus and, if installed, on the
mnemonic displays.
Editing Custom Controls
A custom control macro can be viewed and modified by inserting or deleting events as desired. Refer
to section “
Editing Custom Control Macros ” on page 9–20 for more information.
Saving and Recalling Custom Controls
A custom control function can be stored to and recalled from a storage device, such as a floppy disk or
USB key. When recording a memory recall in a custom control macro, it may be necessary to add a
pause of between 1-10 frames after the memory recall in the macro. Refer to the section, “
Custom
Control Pauses ” in the Synergy Series Installation Guide for details on inserting pauses in a custom
control macro
Deleting Custom Controls
A custom control function can be deleted from a button. Refer to section “ Deleting Custom
Controls ” on page 9–26 for more information. In the Synergy Series Installation Guide , refer to
Chapter 8, “ Custom Control Basics ” for complete instructions on programming your custom control
buttons.
Note While recording a custom control macro, pressing the custom control
button of an existing macro will record only the call to that button’s
macro function, and will stop the recording in progress. Upon playback
of the just-recorded macro, the called macro will be performed as the
last function.