Ross Synergy 100 MD, Руководство оператора

Страница: 82 / 402

5–2 • Transitions Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Transition Control Group
The Transition Control Group is where all PGM , PST , Key , and DSK transitions are set up and
performed. You select which buses you want to take to air during the next transition, as well as how
you want the transition to be performed.
Transition Control Group Overview
This section includes descriptions of the Transition Control Group of the Synergy 100 MD control
panel.
Transition Control Group
1. Fader Section
The Fader handle is used to perform manual transitions. The “type” of transition is
based on the transition button that is selected in the Transition Type Section . The
Fader performs one complete transition when it is moved from one limit to the other.
The Transition Progress Bar located to the left of the Fader indicates the direction of
Fader travel during a transition. As the transition progresses, the LED segments of the
bar will illuminate. For full or partial transitions (when the Fader is paused part-way
through), the unlit portion of the bar indicates the direction that the Fader must be
moved in order to complete the transition.
2. Transition Parameter Section
The buttons in the Transition Parameter Section allow you to set the Transition Limit
and Preset Black functions for the next transition.
• The
TRANS LIMIT
button allows you to hold a transition at a selected position,
between the two Fader end limits. The transition can then either be reversed,
1) Fader Section
2) Transition Parameter Section
3) Fade To Black Button 4) DSK Transition Section
5) Automatic Transition Buttons
6) Transition Type Section 7) Next Transition Section
Note
It does not matter which limit you start or end the transition on, as long
as you move the fader from one limit to the other, one full transition
will be performed and the crosspoint selections on the PGM and PST
buses will flip-flop.
Note
If you have the MultiDSK option, the TRANS LIMIT and PST
BLACK buttons will be DSK4 DISS and DSK5 DISS , respectively.
The Transition Limit or PST Black features will be disabled.
ON AIR ON AIR ON AIR ON AIR
ON AIR
BKGD KEY1 KEY2
DISS
CUT
WIPE
AUTO
TRANS
TRANS
LIMIT
DSK
CUT
PST
BLACK
DSK
DISS
FADE
TO
BLACK
DVE
T R A N S I T I O N C O N T R O L
2
4
3
7
5
6
1
TRANS
LIMIT