Ross Synergy 100 MD, Руководство оператора

Страница: 385 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Glossary of Terms • GL–3
Soft Edge
— A pattern edge effect produced by mixing key source and key fill signals in such a
way that the edge of the pattern is not sharp.
Split Screen
— An effect in which a wipe pattern provides the key source signal. This is known
as a “preset pattern” key.
Tally
— An indicator that illuminates when the associated push-button or control is selected or is
on-air.
Termination
— A means of closing a circuit by connecting a resistive load to it. In video
systems, a termination is typically a 75 ohm resistive load.
Transition
— A controlled change from one video input to another video input or black. The
change can occur through a wipe, cut, dissolve or “DVE Send” effect.
Transition Preview
— A transition seen only on the preview monitor. It may be observed and
adjusted without disturbing the program or “on-air” output.
Video
— The electrical signal produced by a television camera, character generator or other
image source. The signal amplitude varies in relation to the tonal scale from black to white
presented at the source. White produces the highest amplitude; black produces the lowest signal
amplitude.
Wipe
— A transition from one video signal to another, in which the change proceeds according
to the shape of a specific pattern. A moving transition line separates the two picture signals.