Ross SRG-4400, Руководство пользователя

Страница: 36 / 193

3–6 • Functional Check Procedures SRG-4400 User Manual (Iss. 06)
Check Outputs
Composite (Analog) Video Signal Outputs:
From the Top Level menu:
1. Highlight < -Video >.
2. [ Confirm ].
3. Highlight the top menu line.
4. [ Confirm ].
5. Select < Video Channel 05 = Composite 1 >.
6. [ Confirm ].
7. Connect the Composite Video output to a Waveform / Picture Monitor using a 75ohm
BNC cable.
8. Set the Waveform / Picture Monitor to view the Composite signal.
9. Check that the Waveform / Picture Monitor displays the appropriate Composite signal.
10. Check that the Composite signal is as configured in the menu, and that selecting and
editing entries in the menu by using the rotary/push control, the configuration of the
Composite signal changes accordingly.
11. Return to the Top Level menu using the [ Back ] button.
Black 1 (Analog) Video Signal Outputs
From the Top Level menu:
1. Select < -Video >.
2. Select < Video Channel 07 = Black 1 >.
3. Connect the Black 1 video output to the Waveform / Picture Monitor using a 75ohm
BNC cable.
4. Set the Waveform / Picture Monitor to view the Black 1 signal.
5. Check that the Waveform / Picture Monitor displays the appropriate Black 1 signal.
6. Check that the Black 1 signal is as configured in the menu, and that selecting and editing
entries in the menu by using the rotary/push control, the configuration of the Black 1
signal changes accordingly.
7. Return to the Top Level menu using the [ Back ] button.
Note
— The format of the Analog Black 1 output follows that of the Composite output;
consequently, the format of this output cannot be changed from within the < Black 1 > menu.