Ross SRA-8802, Руководство пользователя

Страница: 32 / 44

4–2 • DashBoard Menus SRA-8802 User Manual (Iss. 04)
Status Tabs
This section summarizes the read-only information displayed in the Status tabs. The fields in the
Status tabs can vary in severity from green (valid), yellow (caution), to red (alarm). DashBoard
reports the most severe alarm for a single field. Alarm colors are noted within the tables as text
set in brackets next to the menu parameter name.
Signal Tab
Table 4.1 outlines the read-only information displayed in the Signal tab.
Table 4.1 Signal Tab Items
Tab Title Item Parameters Description
Channel A
Channel A Status
OK (Green) A valid input signal is detected
No input (Red)
Input signal is not present. The Alarm on
Loss of Input for this channel is enabled.
No input (Green)
Input signal is not present. The Alarm on
Loss of Input for this channel is disabled.
Input
No signal Input signal is not present
<125mB/s signal
A signal detected at less than 125Mbps is
present
<125mB/s signal (backup)
A signal of less than 125Mbps is present
from the backup source (BACKUP IN)
SD signal A valid 270Mbps input signal is present
SD signal (backup)
A valid 270Mbps input signal is present
from the backup source (BACKUP IN)
HD signal A valid 1.485Gbps input signal is present
HD signal (backup)
A valid 1.485Gbps input signal is present
from the backup source (BACKUP IN)
3G signal A valid 2.97Gbps input signal is present
3G signal (backup)
A valid 2.97Gbps input signal is present
from the backup source (BACKUP IN)
Equalizer bypassed
Input signal is present and the equalizer is
bypassed (the Enable Equalizer check
box is not selected in the Setup tab)
Output
Locked - 270Mbps Reclocker locks at 270Mbps
Locked - 1.5Gbps Reclocker locks at 1.485Gbps
Locked - 3.0Gbps Reclocker locks at 2.97Gbps
Unlocked (muted)
Reclocker is enabled and unlocked. The
output is automatically muted.
Reclocker bypassed
Input signal is present and the reclocker is
bypassed (the Enable Reclocker check
box is not selected in the Setup tab)
No signal (muted)
Input signal is not present. The output is
automatically muted.