Page 2
RXT150P
IMPORTANT
Please read all of the safety and operating instructions carefully before using this product.
Please pay particular attention to all sections of this manual that carry warning symbols and
notices.
WARNING!
This is a Warning symbol. This symbol is used throughout the manual whenever
there is a risk of personal injury. Ensure that these warnings are read and under-
stood at all times.
CAUTION!
This is a Caution symbol. This symbol is used throughout the user guide when-
ever there is a risk of damaging your product. Ensure that these warnings are
read and understood at all times.
GENERAL DESCRIPTION
This welder is a power source for light duty manual arc welding only. It has been designed
and manufactured specifically for continuous MIG welding of carbon or mild steels with and
without protective gas using appropriate cored (tubular) electrode wire or solid wire. Power
for the arc is given by a single phase transformer with a drooping characteristic. It is suitable
for use with 0.6mm solid or 0.8/0.9mm cored wire and for welding materials up to 6mm.
PRODUCT SPECIFICATION
Note: This unit is suitable for connection to standard domestic 10 Amp power outlet.
Item
RXT150P
Input Power
V
230
Frequency Hz
50
Phase No.
1
Rated No-load Voltage
V
33 V DC
Rated Input Capacity
KVA
4.8 KVA
Rated Duty Cycle
%
10
Output current
A
35-115A — Peak 150A
Insulation Grade
H
Cooling Type
Fan Cooled
Case Protection Class
IP21S ,not suitable for storage or use in rain
External Dimension:
L x W x H
cm
49cm x 24cm x 37cm
Weight kg
20kg