Page 2
RXT150E
IMPORTANT
Please read all of the safety and operating instructions carefully before using this product.
Please pay particular attention to all sections of this manual that carry warning symbols and
notices.
WARNING!
This is a Warning symbol. This symbol is used throughout the manual whenever
there is a risk of personal injury. Ensure that these warnings are read and under-
stood at all times.
CAUTION!
This is a Caution symbol. This symbol is used throughout the user guide when-
ever there is a risk of damaging your product. Ensure that these warnings are
read and understood at all times.
GENERAL DESCRIPTION
This unit is a limited duty power source for manual arc welding. The power for the arc comes from an
electronic circuit know as an inverter. The welding current output can be adjusted by means of a control
knob on the front panel.
It is suitable for welding up to 7mm in mild steel using 3.2mm welding rods. It is not suitable for larger
welding rods nor use with generators.
Caution!
Using this product with welding rods greater than 3.2mm or with a generator will void
your warranty.
Each unit is fitted with a thermal protector which switches off the welder if the transformer
overheats
and self-resets when its temperature has cooled to a normal level.
A yellow pilot lamp in the front panel will light to indicate thermal protection intervention.
Item
RXT150E
Input Power
V
230 AC
Frequency
Hz
50
Phase No.
1
Rated No-load Voltage
V
78 DC
Effective Input Current
Amps
7.9
Rated Duty Cycle
10% @ 140 Amps
Output current
Amps
20 - 140 (Peak 150)
Electrode size
mm
1.6 - 3.2
Cooling Type
Fan Cooled
Case Protection Class
IP21S (Not suitable for use in rain)
Net Weight
kg
4.6
PRODUCT SPECIFICATION
Note: This unit is suitable for connection to standard domestic 10amp power outlet.
