Page 2
RXT140P
IMPORTANT
Please read all of the safety and operating instructions carefully before using this product.
Please pay particular attention to all sections of this manual that carry warning symbols and
notices.
WARNING!
This is a Warning symbol. This symbol is used throughout the manual whenever
there is a risk of personal injury. Ensure that these warnings are read and under-
stood at all times.
CAUTION!
This is a Caution symbol. This symbol is used throughout the user guide when-
ever there is a risk of damaging your product. Ensure that these warnings are
read and understood at all times.
GENERAL DESCRIPTION
This unit is a limited duty power source for manual arc welding. The power for the arc comes from by a
transformer with a magnetic shunt so that the welding current output can be adjusted.
It is suitable for welding up to 6mm in mild steel.
Each unit is fitted with a thermal protector which switches off the welder if the transformer
overheats and self-resets when its temperature has cooled to a normal level.
A yellow pilot lamp in the front panel will light to indicate thermal protection intervention.
Values of “tw” and “tr” shown on the specification plate of the welder indicate average welding time
and rest time when used for that welding current and welding rod combination.
Item
Smart-130BS (
RXT140P
)
Input Power
V
240 AC
Frequency
Hz
50
Phase No.
1
Rated No-load Voltage
V
48V AC
Effective Input Current
A
9.9Amps
Rated Duty Cycle
%
10
Output current
A
55—130A
Insulation Grade
H
Cooling Type
Fan Cooled
Case Protection Class
IP21S (Not suitable for use in rain)
External Dimension:
L x W x H
cm
40cm x 22cm x 28cm
Weight
kg
13.2kg
PRODUCT SPECIFICATION
Note: This unit is suitable for connection to standard domestic 10amp power outlet.
