Page 11
RXT135E
THERMOSTATIC PROTECTION
This welder is automatically protected from overheating by a thermal overload cut out protec-
tor. If the transformer overheats the overload cut out protector will activate and cut off. The
amber light will illuminate to show that the cut out has operated.
After cooling the protector will reconnect the supply circuit and the welder will be ready for
further use.
NOTE:
If the duty cycle of the machine is exceeded the thermostatic protection will activate.
MAINTENANCE
WARNING!
Before starting any cleaning, or maintenance procedures on the welding ma-
chine, make sure that it is switched Off and disconnected from the mains
supply.
There are no user serviceable parts inside the welder. Refer to qualified service personnel if
any internal maintenance is required.
WARRANTY:
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have the goods re-
paired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
It is guaranteed against faulty materials and workmanship for 12 months from the date of
purchase. Please retain your receipt as proof of purchase.
If the product is found to be defective within the relevant time period, we will either replace
all defective parts or, at our discretion, replace the unit free of charge.
This guarantee does not cover defects caused by or resulting from: misuse, abuse or ne-
glect; trade, professional or hire use; repairs attempted by anyone other than our authorised
service agent; or damage caused by foreign objects, substances or accident.
Note:
Consumable items such as clamps and electrode holders not covered by warranty.
Distributed in Australia by J W Ross and Sons ( Australia ) Pty Ltd.
PO Box 352 North Ryde BC, NSW, 1670
Inquiries phone 1800 251 338