EXTENSION ADAPTOR
Accessories require the use of the extension adaptor.
Remove the lance from the gun and attach the adap-
tor as necessary. Grip the end of the gun and screw
the adaptor onto the gun ensuring it is tight,
Fig 10.
Do not over tighten as this could damage both the
connectors.
Fit the accessories into the gun assembly by pushing
them into the gun assembly and locating the lugs, at
the same time turn clockwise to lock
into position,
Fig 11.
TURBO LANCE
A turbo lance, sometimes referred to as a rotary lance,
is a very effective tool that can significantly reduce
cleaning time.
The turbo nozzle combines the power of a narrow
high impact stream and the efficiency of a 25 degree
fan pattern. This swirls the narrow high impact stream
into a cone shape that cleans a larger area.
Caution
Since a turbo lance uses a narrow high
impact stream, only use it in applications where the
leaning surface cannot be damaged by a narrow high
impact spray. Always test on an inconspicuous area
first to ensure you do not damage the surface.
Note:
The turbo lance is NOT adjustable and cannot be
used to apply detergent.
FIXED BRUSH
Your pressure washer is supplied with a fixed brush. It
has soft bristles and can be used in conjunction with
the detergent dispenser to apply detergent to the
surface you are cleaning.
It is ideal for cleaning car bodywork, windows etc. This
is a low pressure setting.
The fixed brush connects to the gun assembly.
WARNING!
Do not fit brushes when the power is
on.
Caution
Ensure the brush is clean and free from de-
bris.
Ensure the surface to be cleaned is sound and will not
be damaged by the brushing action. Test on an incon-
spicuous area first. Any grit or debris on the surface to
be cleaned or in the brush can cause damage to that
surface. Please ensure both are checked prior to
cleaning.
HOW TO AVOID DAMAGING SURFACES
Damage to cleaning surfaces occurs because the im-
pact force of the water exceeds the durability of the
surface. Never use a narrow high impact stream or a
turbo/rotary lance on a surface that is susceptible to
damage. Avoid spraying windows with a narrow high
impact stream or turbo lance as this may cause
breakage.
Follow these simple steps to avoid damaging your
surfaces:
1. Before triggering the gun, adjust the nozzle to a
wide fan pattern.
2. Place the nozzle approximately 1.5 to 2 metres from
cleaning surface and begin spraying.
3. Vary the fan pattern spray angle and the distance to
the cleaning surface until optimum cleaning efficiency
is achieved without damaging the surface.
USING DETERGENT
Add detergent to the container and replace the cap.
Do not overfill.
Set the adjustable lance at
low
pressure.
•
Pull forward on the adjusting sleeve of the standard
lance
Fig 11A.
•
Depress the trigger to spray detergent.
Note:
The detergent function does not work on high
pressure.
Fig 11A