Ross ROSSPOWER RPPHA200MM, Руководство пользователя

Страница: 2 / 12

Please read and save these instructions. Read through this owner’s manual carefully before using product.
Protect yourself and others by observing all safety information, warnings and cautions. Failure to comply with
instructions could result in personal injury and/or damage to product or property. Please retain instructions for
future reference.
WARNING!
The operator of this machine is advised that reactive torque may occur when the
rotating auger makes contact with hard debris. Therefore a firm hold with both hands is essential.
PETROL ENGINE
SPECIFIC SAFETY INSTRUCTIONS
• Petrol or diesel powered engines must never be used in unventilated or closed spaces. The exhaust fumes are
highly dangerous and can Cause”Carbon Monoxide Poisoning” which will cause drowsiness and death.
• The engine must not be run at speeds that exceed the maximum set speed. Operating an engine at exces-
sive speeds increases the hazard of personal injury. Do not tamper with components, which may increase or
decrease the governed speed.
• Never leave the engine running unattended near a building or near a canvas or plastic structure I.e. Tents etc.
• Always use the correct fuel as stated in the user manual and on the rating plate.
• To prevent fire, always stop the engine when refuelling and never over fill the fuel tank. Always clean up spilt
fuel immediately.
• Do not run the engine in or near an explosive atmosphere.
• Check the fuel system periodically for leaks. Seals and hoses should be checked for signs of deterioration or
chafing. Check for loose or missing clamps damaged fuel tank or filler cap. All defects should be corrected
before further use.
• Do not allow the engine to run out of fuel while in use. The fuel contains the lubrication that protects the
engine.
• Before transporting in a vehicle, drain all fuel to prevent leakage.
• Store the engine in a well-ventilated area with the fuel tank empty.
HOLE BORER
SPECIFIC SAFETY INSTRUCTIONS
Before using the hole borer the operator must be informed of the manufacturers safety instructions and in-
structions for use.
• The machine must only be operated by a trained person.
• Use the hole borer only in daylight or in good artificial light.
• Always start the hole borer carefully with your feet well away from the auger bit.
• Do not leave the hole borer unattended when the engine is running.
• Do not use the hole borer barefoot or in open toed sandals. Always wear suitable clothing, gloves and safety
shoes.
• Use the hole borer in soil only, do not use to bore holes in excessively rocky ground.
• Do not bore holes in an area where there may be hidden gas and water pipes or electricity and other cables.
• Ensure the auger bit is attached to the gearbox output shaft securely.
• Do not use a damaged or worn auger bit.
• Do not carry the hole borer with the engine running, the auger bit should not rotate when the engine is
idling.
• Keep hands and feet away from the rotating auger bit at all times.
• Always ensure that the engine is switched off and the spark plug cap is removed before making any adjust-
ments.
• Before using your hole borer always visually inspect it to see if any parts are worn or damaged. Replace dam-
aged parts before using the machine.