ADDITIONAL PRECAUTIONS FOR CHARGER & BATTERY PACK
WARNING!
Only charge batteries designed for use with this charger.
Charge only RG-18B Batteries with
Charger RG-21C
1.
Do not charge battery pack when temperature is below 0°C or above 45°C.
2.
Do not attempt to use a step-up transformer, an engine generator or DC power receptacle.
3.
Do not allow anything to cover or clog the charger vents.
4.
Always protect the battery terminals when the battery pack is not being used.
5.
Do not short the battery pack.
6.
Do not touch the terminals with any conductive material.
7.
Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
8.
Do not expose battery pack to water or rain.
WARNING!
A battery short can cause a large current flow, overheating, possible burns and even a
meltdown.
9.
Do not store the tool and battery pack in locations where the temperature may reach or exceed
45°C .
10.
Do not incinerate the Battery pack even if it is severely damaged or is completely worn out.
The
battery pack can explode in a fire.
11.
Be careful not to drop, shake or strike battery.
12.
Do not charge inside a box or container of any kind.
The battery must be placed in a well ventilated
area during charging.
CHARGING
NOTE:
Newly purchased battery packs are not fully charged and must be charged before using in
your cordless tool(s).
1 Slide the battery pack into the charger as shown
below.
2 Connect the charger to the main supply and
then note the LED indicators at the front of the
charger
LED
3
After normal usage, your battery pack should be fully charged in 1 hour.
If the power pack is rundown
completely, it may take up to 1 hour to become fully charged.